Detailed Introduction of Stainless Steel Mesh Cover

In order to better ensure the safety when the fan blades rotate, a grille is installed on the fan, and the stainless steel grille is divided into a front grille and a rear grille. The rear grille is welded into a radial shape using 1.4-1.8mm steel wire and 2*5 or 2*6 flat steel wire, and is fixed on the top of the fan with screws or nuts. The front grille is made of 1.4mm steel wire and 2*5 or 2*6 flat steel wire and welded into a radial shape. The surface of the grille is treated with stainless steel or electrostatic spraying, which can not only prevent the grille from being corroded, but also improve the appearance of the stainless steel grille. At the same time, in order to improve the appearance of the exhaust fan grille, some decorative rings are usually embedded in the middle of the front grille and fixed on the rear axle. Therefore, with the joint function of the front, rear, left and right grilles, the fan can operate better.